ProDirect 2 Ton 14 SEER Split System A/C Air Handler - Multiposition
Total comfort isn't hard to attain when you have a unit like the multiposition MRCOOL ProDirect 2 Ton 14 SEER Split System Air Handler working in your home.
This unit uses its ‚"A" shaped evaporator coil to draw out all of the discomfort in your home, and once the air is ready to make you comfortable, it gets dispersed throughout your home by the three-speed direct drive blower motor. It goes through a removable filter to ensure the air is purified of contaminants so You're only ever breathing crisp and clean air. It can also be installed in four airflow directions and with an electric heat kit, making it extremely accommodating.
Your comfort will never be in danger thanks to the corrosion resistant galvanized steel cabinet that guards your unit from harm. There's also a warranty that covers the air handler if you register online in case something goes wrong. To make your home feel better every day of the year without making your bills go higher and higher, have the ProDirect 2 ton split system air handler installed in your home.
|
Dimensions |
22" D x 45 3/4" H x 19 2/3" W |
|
SEER |
14 |
|
CFM |
938/804/738 |
|
Cooling Capacity |
24000 BTU |
|
Voltage |
208-230 V |
|
Phase |
1 |
|
Cycle |
60 Hz |
|
Decibel Rating |
37-42 dBA |
|
Decibel Rating Low |
37 dBA |
|
Decibel Rating High |
42 dBA |
|
Number Of Speeds |
3 Speed |
|
Blower Motor Speeds |
3 Speed |
|
Blower Motor Rpm |
570/530/490 |
|
Filter Type |
Replacable |
|
ETL Listed |
Yes |
|
AHRI CERTIFIED |
Yes |
|
Registered Warranty |
10 Year Limited Warranty |
|
Net Weight |
130 lbs |
|
Gross Depth |
25-3/5in |
|
Gross Height |
47-5/8in |
|
Gross Width |
22-5/6in |
|
Gross Weight |
141 lbs |
What BTU rating should I choose for my air handler?
| Air Handler BTU | Coverage Area/Room Size (Sq Ft.)* |
| 9K BTU | Up to 375 Sq. ft |
| 12K BTU | Up to 500 Sq. ft |
| 18K BTU | Up to 750 Sq. ft |
| 24k BTU | Up to 1000 Sq. ft |
| 36k BTU | Up to 1500 Sq. ft |
*Ceiling height, insulation, and local climate may impact the coverage area. For example, an uninsulated room will require more power than a well insulated room.
*Shipping Policy
Installed my own central HP system. It was a bit of work but nothing beyond a person with basic mechanical and electrical skills. It took me a while because I had to remove the existing electric forced air furnace from a pretty tight place. Some custom sheet metal work and a bit of custom electrical too. Worked perfectly when powered up and I actually like the thermostat provided, although I wish it was clearer how to set up a temperature set-back schedule. Pre-charged refrigerant piping was something new and I liked that too. The best thing is that my electric utility forked out $4,000 and that paid for the unit!
Installed with ceiling cassettes... Quiet and keeping us cool so far !
My unit arrived on time and undamaged. It was installed without a problem. I hate the fuse unit didn't come with it. They did UPS it to me so I didn't have to put installation on hold. The unit is very quiet and works well.
Very good delivery service installed and works like a Should
Product came packaged well, undamaged. Installation was difficult, followed instructions for suction line above coil on bilevel installation with coil above condenser. 108 inside house on startup, 103 ambient. First start, high pressure 500, low pressure 170, supply air temp 66 degrees. Very worried at first, but after house cooed down, everything within parameters. Researched 410a refrigerant, found out it looses efficiency exponentially during temperature extremes. My old r22 unit would supply 54 degree supply air in comparable operating conditions. EPA, government, a/c manufactures all lying to American public
- We are an authorized MRCOOL dealer
- Industry leading sales and customer service
- Thousands of happy customers
