The MrCool Universal Quick Connect Line Set Coupler Kit allows you to extend the length of a MrCool Universal Quick Connect Pre-Charged Line Set beyond its standard length by connecting it with a second MrCool Universal Pre-Charged line set. This will enable you to meet the needs of your particular installation without being forced to rely on traditional line sets and time-consuming installation techniques. Meanwhile, you will be able to deploy a MrCool Universal heat pump in locations that it would otherwise not be able to operate.
So, how does the MrCool Universal Quick Connect Line Set Coupler Kit work with the MrCool Universal Pre-Charged lines? Simply use the screw-on ends to connect two couplers to one end of a Universal Quick Connect line. Then screw the opposite ends of the couplers to a second Universal Quick Connect line. Use a wrench to make sure the connections are tight, cover the connections with the provided insulation tape, then slide the insulation sleeves over the couplers to ensure no copper tubing is exposed.
Final Sale: MRCOOL Accessories are non-returnable.
Contact a representative if you need assistance with finding the right HVAC Accessory.
What BTU rating should I choose for my air handler?
|Air Handler BTU
|Coverage Area/Room Size (Sq Ft.)*
|Up to 375 Sq. ft
|Up to 500 Sq. ft
|Up to 750 Sq. ft
|Up to 1000 Sq. ft
|Up to 1500 Sq. ft
*Ceiling height, insulation, and local climate may impact the coverage area. For example, an uninsulated room will require more power than a well insulated room.
Installed my own central HP system. It was a bit of work but nothing beyond a person with basic mechanical and electrical skills. It took me a while because I had to remove the existing electric forced air furnace from a pretty tight place. Some custom sheet metal work and a bit of custom electrical too. Worked perfectly when powered up and I actually like the thermostat provided, although I wish it was clearer how to set up a temperature set-back schedule. Pre-charged refrigerant piping was something new and I liked that too. The best thing is that my electric utility forked out $4,000 and that paid for the unit!
My unit arrived on time and undamaged. It was installed without a problem. I hate the fuse unit didn't come with it. They did UPS it to me so I didn't have to put installation on hold. The unit is very quiet and works well.
Very good delivery service installed and works like a Should
Product came packaged well, undamaged. Installation was difficult, followed instructions for suction line above coil on bilevel installation with coil above condenser. 108 inside house on startup, 103 ambient. First start, high pressure 500, low pressure 170, supply air temp 66 degrees. Very worried at first, but after house cooed down, everything within parameters. Researched 410a refrigerant, found out it looses efficiency exponentially during temperature extremes. My old r22 unit would supply 54 degree supply air in comparable operating conditions. EPA, government, a/c manufactures all lying to American public
- We are an authorized MRCOOL dealer
- Industry leading sales and customer service
- Thousands of happy customers