During periods of extreme weather, the MRCOOL® VersaPro™ 60K BTU 13.4 SEER2 Package Heat Pump is a cost-effective yet high-quality solution, seamlessly integrating powerful cooling and heating capabilities within a single, easy-to-install system. Housed within a robust anti-rust, power-painted galvanized steel cabinet, this heating and cooling solution embodies the perfect balance between affordability and durability.
The unit's high-performance compressors operate smoothly, quietly, and consistently, supported by internal safeguards that shield them from the damage caused by high and low pressures, coil temperature variations, and power fluctuations, thereby lengthening their lifespan. With its ECM blower motor and optimized copper tube and aluminum fin indoor and outdoor coils, this package heat pump delivers exceptional efficiency. With a horizontal discharge design, the unit offers added flexibility, capable of accommodating an electric heat kit if desired. Having undergone rigorous testing to become AHRI certified and ETL listed, this package heat pump ensures adherence to the most stringent quality standards. For enhanced peace of mind, registering the unit within 90 days activates an extensive 10-year warranty covering both parts and the compressor. Even without registration, the unit is backed by a standard 5-year parts and compressor warranty, reinforcing its reliability and durability.
|
Dimensions |
42.05" D x 33.07" H x 58.50" W |
|
SEER2 |
13.4 |
|
Cooling Capacity (BTU) |
60000 |
|
Heating Capacity (BTU) |
60000 |
|
Voltage (V) |
208-230 |
|
Phase |
1 |
|
Cycle |
60 |
|
Max Fuse Breaker (A) |
55 |
|
Min Circuit Ampacity (A) |
34.9 |
|
Color |
Gray |
|
Rated Load |
21.5 |
|
Refrigerant Type |
R410A |
|
Refrigerant Volume (OZ) |
148 |
|
Compressor Motor Type |
Scroll |
|
Condenser Fan Motor Type |
ECM |
|
Condenser Fan Motor HP |
1/4 |
|
Condenser Fan Motor RPM |
980 |
|
Blower Motor Type |
PSC |
|
Blower Motor HP |
3/4 |
|
Auxiliary Heater Included |
No |
|
Auxiliary Heater Available |
Yes |
|
Auxiliary Heater Sizes |
5/8/10/15/20kW |
|
ETL Listed |
yes |
|
AHRI Certified |
yes |
|
Registered Parts Warranty |
10 Years |
|
Base Parts Warranty |
5 Years |
|
Registered Compressor Warranty |
10 Years |
|
Base Compressor Warranty |
5 Years |
|
Contains Electronics |
Yes |
|
Contains Chemicals |
Yes |
|
Proposition 65 Warning |
Yes |
|
Net Weight (Lbs) |
457 |
*Shipping Policy
I ordered a HVAC system and it arrived in a timely manner and with no apparent issues. I thought the system was defective once installed but it was the installers fault who wired it wrong. My only issue would be the fee (30% I believe) to return a defective item within the 30 day return policy. If it is defective the customer shouldn't have to pay a fee to return an item that is not operating as designed. Other than that this is a good company.
Installed my own central HP system. It was a bit of work but nothing beyond a person with basic mechanical and electrical skills. It took me a while because I had to remove the existing electric forced air furnace from a pretty tight place. Some custom sheet metal work and a bit of custom electrical too. Worked perfectly when powered up and I actually like the thermostat provided, although I wish it was clearer how to set up a temperature set-back schedule. Pre-charged refrigerant piping was something new and I liked that too. The best thing is that my electric utility forked out $4,000 and that paid for the unit!
Installed with ceiling cassettes... Quiet and keeping us cool so far !
I would buy elsewhere. Unit works pretty well. We get phone calls every couple weeks trying to sell us a warranty. This website sold our information to them. They made a few dollars, and we pay for it every 2 weeks getting call after call trying to sell a warranty.
In the last few years I have installed four 12000 btu Mr Cool units and one of the 27000 btu units with two 12000 btu air handlers. I am happy with the performance of all of them, but if I had it to do over again, I would install two of the 12000 btu units instead of the 27000 btu unit. The price would be approximately the same, but the smaller units are much easier to deal with. The fact that the 12000 btu units require only 120 v power means that you can often make use of existing wiring rather than run a new line. The 27000 unit is quite heavy. It is much more difficult to move around . I didn't realize that fluid is pumped to both units even if only one of them is turned on. This results in confusing readings on the app and it probably results in reduced efficiency. I many cases using two smaller units rather than a large one would allow use of shorter lines. I appreciate that fact that HOD makes it easy to order units with appropriate line lengths rather than being forced to use standard sizes that may be longer than necessary.
- We are an authorized MRCOOL dealer
- Industry leading sales and customer service
- Thousands of happy customers
