ProDirect 3 Ton up to 15 SEER2 Split System A/C Condenser
Treat yourself to the comfort you’ve always dreamed of, especially if you’ve had to endure summer after summer of sweaty discomfort, with the ProDirect 3 Ton 15 SEER Split System A/C Condenser. The rotary compressor within this system can process refrigerant extremely quickly to get your home feeling the precise temperature you prefer. The piston flow control device can bump your system’s efficiency levels up significantly, too.
The safety of your system is a priority, because if something happens to it, you’ve lost your source of comfort! That’s why you can rely on the galvanized steel cabinet and the Gold Fin® coil coating to keep your unit running as if it’s brand new! This environmentally-friendly and non-toxic coating can keep water from sticking to the coils of your unit so rust can’t form. This AHRI certified and ETL listed unit is further protected by a reliable warranty once you register it online. Don’t be disappointed by an uncomfortable summer ever again with this MRCOOL ProDirect 3 Ton split system A/C condenser providing you comfort.
|
Dimensions |
29-1/7 in D x 29-1/7 in H x 29-1/7 in W |
|
SEER2 |
14.3 |
|
EER2 |
11.7 |
|
CFM |
3350 |
|
Tonnage |
3 |
|
Cooling Capacity |
33000 |
|
Voltage |
230 V |
|
Phase |
1 |
|
Cycle |
60 Hz |
|
Max Fuse Breaker |
16.14 A |
|
Refrigerant Volume |
112.87 oz |
|
Decibel Rating |
61 dBA |
|
Liquid Line Size |
3/8 in |
|
Suction Line Size |
3/4 in |
|
Compressor Motor Type |
scroll |
|
ETL Listed |
Yes |
|
AHRI Certified |
Yes |
|
Registered Parts Warranty |
10 year parts |
|
Proposition 65 Warning |
Yes |
|
Net Weight |
152 lbs |
|
Gross Depth |
29-9/10 in |
|
Gross Height |
25-9/10 in |
|
Gross Width |
29-9/10 in |
|
Gross Weight |
162 lbs |
What BTU rating should I choose for my air handler?
| Air Handler BTU | Coverage Area/Room Size (Sq Ft.)* |
| 9K BTU | Up to 375 Sq. ft |
| 12K BTU | Up to 500 Sq. ft |
| 18K BTU | Up to 750 Sq. ft |
| 24k BTU | Up to 1000 Sq. ft |
| 36k BTU | Up to 1500 Sq. ft |
*Ceiling height, insulation, and local climate may impact the coverage area. For example, an uninsulated room will require more power than a well insulated room.
*Shipping Policy
Installed my own central HP system. It was a bit of work but nothing beyond a person with basic mechanical and electrical skills. It took me a while because I had to remove the existing electric forced air furnace from a pretty tight place. Some custom sheet metal work and a bit of custom electrical too. Worked perfectly when powered up and I actually like the thermostat provided, although I wish it was clearer how to set up a temperature set-back schedule. Pre-charged refrigerant piping was something new and I liked that too. The best thing is that my electric utility forked out $4,000 and that paid for the unit!
Installed with ceiling cassettes... Quiet and keeping us cool so far !
Very good delivery service installed and works like a Should
Product came packaged well, undamaged. Installation was difficult, followed instructions for suction line above coil on bilevel installation with coil above condenser. 108 inside house on startup, 103 ambient. First start, high pressure 500, low pressure 170, supply air temp 66 degrees. Very worried at first, but after house cooed down, everything within parameters. Researched 410a refrigerant, found out it looses efficiency exponentially during temperature extremes. My old r22 unit would supply 54 degree supply air in comparable operating conditions. EPA, government, a/c manufactures all lying to American public
First time ever installing Mr cool unit was built very good it has a dc converted fan motor,came with a salt shelf type coating om inside of unit over all very impressed 5star system
- We are an authorized MRCOOL dealer
- Industry leading sales and customer service
- Thousands of happy customers
