ProDirect 1.5 Ton up to 15 SEER2 Split System A/C Air Handler - Multiposition
Make your life easier by bringing comfort into your home for you and your family to relax in with this multiposition MRCOOL ProDirect 1.5 Ton 15 SEER Split System Air Handler. There’s nothing like getting home and getting greeted by the precisely cooled or heated air that the unit’s “A” shaped evaporator coil helped create. You’ll feel this comforting air throughout every corner of your home with the help of the three-speed direct drive blower motor.
This air will make its way through the removable filter that is easy to clean and replace when needed. When you need extra heat, you can install an electric heat kit in this air handler. The galvanized steel cabinet offers the best protection, because it won’t let anything, like corrosion, get in the way of you and your comfort. The warranty that covers this AHRI certified, ETL listed air handler when you register your product online will reassure you that everything will be fine in case something goes wrong.
You don’t want to struggle to keep comfortable within your own home, so you need the MRCOOL 1.5 ton ProDirect split system air handler to ensure absolute comfort.
|
Dimensions |
22 in D x 45-3/4 in H x 19-2/3 in W |
|
CFM |
678 |
|
Voltage |
208-230 V |
|
Phase |
1 |
|
Cycle |
60 Hz |
|
Decibel Rating |
50 dBA |
|
Auxiliary Heater Included |
No |
|
Auxiliary Heater Available |
Yes |
|
Auxiliary Heater Sizes |
5kW, 7.5kW |
|
ETL Listed |
Yes |
|
AHRI Certified |
Yes |
|
Registered Parts Warranty |
10 year parts |
|
Proposition 65 Warning |
Yes |
|
Net Weight |
123 lbs |
|
Gross Depth |
25-3/5 in |
|
Gross Height |
47-5/8 in |
|
Gross Width |
22-5/6 in |
|
Gross Weight |
134 lbs |
What BTU rating should I choose for my air handler?
| Air Handler BTU | Coverage Area/Room Size (Sq Ft.)* |
| 9K BTU | Up to 375 Sq. ft |
| 12K BTU | Up to 500 Sq. ft |
| 18K BTU | Up to 750 Sq. ft |
| 24k BTU | Up to 1000 Sq. ft |
| 36k BTU | Up to 1500 Sq. ft |
*Ceiling height, insulation, and local climate may impact the coverage area. For example, an uninsulated room will require more power than a well insulated room.
*Shipping Policy
Installed my own central HP system. It was a bit of work but nothing beyond a person with basic mechanical and electrical skills. It took me a while because I had to remove the existing electric forced air furnace from a pretty tight place. Some custom sheet metal work and a bit of custom electrical too. Worked perfectly when powered up and I actually like the thermostat provided, although I wish it was clearer how to set up a temperature set-back schedule. Pre-charged refrigerant piping was something new and I liked that too. The best thing is that my electric utility forked out $4,000 and that paid for the unit!
Installed with ceiling cassettes... Quiet and keeping us cool so far !
My unit arrived on time and undamaged. It was installed without a problem. I hate the fuse unit didn't come with it. They did UPS it to me so I didn't have to put installation on hold. The unit is very quiet and works well.
Very good delivery service installed and works like a Should
Product came packaged well, undamaged. Installation was difficult, followed instructions for suction line above coil on bilevel installation with coil above condenser. 108 inside house on startup, 103 ambient. First start, high pressure 500, low pressure 170, supply air temp 66 degrees. Very worried at first, but after house cooed down, everything within parameters. Researched 410a refrigerant, found out it looses efficiency exponentially during temperature extremes. My old r22 unit would supply 54 degree supply air in comparable operating conditions. EPA, government, a/c manufactures all lying to American public
- We are an authorized MRCOOL dealer
- Industry leading sales and customer service
- Thousands of happy customers
